Artesyn COMX-P2020 Installation and Use (February 2015) - Manual (Page 37)

Hardware Preparation and Installation
COMX-P2020 Module Installation and Use (6806800K97E) 37
6. Press down on the memory module against the COM Express module until you hear
it snap into place. The module must be properly aligned before you press it down
into its final position. You can remove the module from the socket and reinstall it if
you cannot press it down into its final position.
Removing a Memory Module
1. Wear the ESD-preventive wrist strap.
2. Release the module from the slot by pushing the spring latches on either side of the
module outward.
3. Lift the module from the COM Express Module.
Damage of the Product and Additional Devices and Modules
Incorrect installation or removal of additional devices or modules damages the product or
the additional devices or modules.
Before installing or removing additional devices or modules, read the respective
documentation and use appropriate tools.