Artesyn COMX-P2020 Installation and Use (February 2015) - Manual (Page 33)

Hardware Preparation and Installation
COMX-P2020 Module Installation and Use (6806800K97E) 33
2.1.3 Power Requirements
The default power input setting for COMX-P2020 is 12 V (11.4 - 12.6).
2.2 Default Settings
The following table shows the default settings of COMX-P2020 module:
2.3 Unpacking and Inspecting the Module
Table 2-3 Module Total Power Consumption
Voltage +12V POWER
Power consumption 12 W (when idle in Linux)
Table 2-4 Default Settings
Component Value
COM Express Power Input 12 V (11.4-12.6)
CPU (speed) 1.2 GHz
Memory (speed) 667 MHz
PCI Express PCIE 2(x1)(2.5Gbps) SerDes lane 1
PCIE 3(x2)(2.5Gbps) SerDes lane 2-3
Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the product can damage
circuits or shorten its life.
Before touching the product make sure that you are working in an ESD-safe environment or
wear an ESD wrist strap or ESD shoes. Hold the product by its edges and do not touch any
components or circuits.