Artesyn COMX-P2020 Installation and Use (February 2015) - Manual (Page 21)

Chapter 1
COMX-P2020 Module Installation and Use (6806800K97E) 21
Introduction
1.1 Features
The COMX-P2020 Module based on the Freescale QorIQ™ P2020 dual core processor. The
COMX-P2020 exhibits all the best open standard attributes: allowing easy technology
upgrades with future devices; competitive pricing with choice of modules; and speedy time to
market.
The COMX-P2020 module is suitable for a range of applications including programmable
automation controllers, security gateways, civil aeronautics, renewable energy controllers,
test and measurement and other embedded devices. The COMX-P2020 module is supported
by a range of real time operating systems and development tools.
The QorIQ P2020 processor is effectively a System-on-Chip device with a range of features.
The main features of COMX-P2020 COM Express Module are as follows:
 Freescale QorIQ™ P2020 processor, two cores running at 1.2 GHz.
 Supports up to 2GB DDR3 ECC SO-UDIMM
 On-board Storage:
– Micro SD card slot
– 2kbit I2C EEPROM
– 4MB SPI Flash
 SDHC signals routed to the COM Express connector
 Storage for bootloader and OS
 Two full-function UARTs
 On-board XGI Z11M Graphics Processor Unit (GPU)
 95 mm x 95 mm compact foorprint
 Supports VGA, LVDS interface
 Ethernet: Three 10/100/1000Base-T Ethernet interface routed to COM Express connectors
 USB: Four USB2.0 ports routed to the COM Express connector
 PCI Express: One PCI-E 1.0 and one x2 PCI-E 1.0 (@2.5 GT/s) ports routed to the COM
Express connectors.
 Boot loader: U-boot