ART Pro Audio Quadra/Fx - Two Channel Effects Processor - Manual (Page 8)

- 5 -
INSTALLATION
The Quadra/FX may be used in a variety of setups including with mixer channel inserts, mixers with reverb send and
return facilities, and in the effects loop of an instrument or P.A. amplifier. Self-contained in an all-steel, single-height
19” rack-mount enclosure, the Quadra/FX is designed for continuous professional use. Because the unit is compact
and lightweight, mounting location is not critical. However, for greater reliability we recommend that you not place the
Quadra/FX on top of power amps, tube equipment, or other sources of heat.
AC POWER HOOKUP
The Quadra/FX has an external power supply designed to operate at 110 VAC @ 50 to 60 Hz. Units
manufactured for use outside the United States of America have been modified to comply with the required
electrical specifications. Only use the adapter that came with the Quadra/FX. If the adapter becomes lost
or damaged, contact A R T Customer Service for replacement.
AUDIO CONNECTIONS
All audio connections to and from the Quadra/FX are ¼” unbalanced TS (Tip = Hot, Sleeve = Ground). We
recommend using only high-quality shielded cables equipped with high-quality connectors.
SAFETY PRECAUTIONS
Warning: To avoid the risk of shock or fire, do not expose this unit to moisture. Refer all servicing to qualified
personnel. Do not remove the metal covers; there are no user-serviceable parts inside. Only use the
Quadra/FX power adapter that came with this unit or one obtained from A R T’s Customer Service
Department.