ART Pro Audio Quadra/Fx - Two Channel Effects Processor User Manual

Page 38

- 35 -

In the Dynamic Class, Special sets the Threshold that switches the Decay time from a minimum setting to

the preset length. As with the above classes, Threshold can be set from 1 to 30 dB below unity gain.

Normally, when the input signal is below the Threshold’s setting, the reverb’s decay time is as set. When

the signal is higher than the Threshold, the Decay time is reduced. If the value in the Display is preceded

by an r (

), this function is reversed; a reduced Decay time occurs when the input signal is below the

Threshold level and becomes normal when the signal is above the Threshold.

A Threshold setting of

2))

is available to disengage all dynamics sensing.