ART Pro Audio Quadra/Fx - Two Channel Effects Processor - Manual (Page 27)

- 24 -
Preset mode and the MIDI edits will not be saved, though they will remain active until you change presets.
MIDI Channel, however, is automatically saved each time it is updated.
TUTORIAL 4: ADVANCED APPLICATION NOTES
The Smart Encoder:
The Quadra/FX’s reverb, delay, and rotary effects have certain parameters that can be triggered with a press of the
front-panel Encoder. These functions allow you to audition a reverb’s sound, tap in new delay times, infinitely repeat a
delay, or spin the rotary effect up and down. The sections below list all available Smart Encoder functions, what they
do, and the different ways to access them.
Available Smart
Encoder Functions: Parameter
LEDs Lit: Numeric
Display:
REVERB
All Classes
Reverb Impulse Decay, Special 444
DELAY
All Classes
Delay Time Tap Delay, Special Delay Time in milliseconds
Except Ambient
Repeat Hold Regen, Special 2))
/
2
ROTARY
Instrument, Concert,
Rotary Spin High/Low Pitch, Special /
%2
Gated, Ambient
Reverb
With reverb effects, the Smart Encoder can be used to trigger a reverb audition impulse. A reverb impulse is a
short, all-frequency burst for testing a reverb’s sound. Use it to audition the quality as well as decay time and
front-end characteristics of your reverb programs. Pressing the Encoder on this option will trigger the sound.
Delay
With delay effects, the Smart Encoder can be used to tap in a new delay time or turn on the repeat hold
function.
&