ARRIS SBG6400 User Guide - Manual (Page 35)

Managing Your Gateway and Connected Networks
SURFboard® SBG6400 Wireless Cable Modem Gateway • User Guide 26
365-095-26377-x.1 This document is uncontrolled pending incorporation in an ARRIS CMS
To create a back up copy of your gateway settings:
1. Click Basic on the SBG6400 Main Menu.
2. Click Backup and Restore from the Basic submenu options.
Figure 27 – SBG6400 Backup and Restore Screen
3. Click Backup and then click OK at the Select ‘Save’ prompt (see below) to back up your SBG6400
configuration settings.
GatewaySettings.bin is the backup gateway configuration file that is downloaded to your computer.
Note: GatewaySettings.bin is the default file name for your gateway configuration file.
4. Right-click on the configuration file name at the bottom of your screen and then select Show in folder
to open the Downloads folder on your computer.
The backup SBG6400 configuration file was saved to the Downloads folder.
Restore Your Gateway Settings
WARNING
!
This action will delete your current gateway configuration settings
(including any custom user name and/or password) and allow you to restore a
previously saved gateway configuration.
Note: After the configuration settings are restored, the gateway will reboot and you will have to log on using
the default username (admin) and password (password).
1. Click Basic on the SBG6400 Main Menu.
2. Click Backup and Restore from the Basic submenu options.
3. Click Choose File to search for a previously saved gateway configuration file from the Downloads
folder on your computer.
4. Select the GatewaySettings.bin file that you want restored on your SBG6400 and then click Open.
5. Click Restore and then click OK at the reboot message prompt (see next page) to reboot the SBG6400
and restore your SBG6400 configuration settings.