ARRIS SBG6400 User Guide - Manual (Page 14)

Product Overview
SURFboard® SBG6400 Wireless Cable Modem Gateway • User Guide 5
365-095-26377-x.1 This document is uncontrolled pending incorporation in an ARRIS CMS
Rear Panel
Figure 2 – SBG6400 Rear View
Table 3: SBG6400 Rear Panel Ports & Connectors
Port Name Description
Two one-gigabit Ethernet ports for RJ-45 cable connections:
• Green - LED is ON - Indicates a device connection is detected
• Green - LED is Blinking - Indicates data traffic is in progress
• Amber - LED is ON – Indicates 10/100 Base-T connection(s)
• Amber - LED is OFF – Indicates GigE connection(s)
USB 2.0 port connection to your computer or other USB device
Reset button Can be used to reboot the gateway or reset the gateway settings.
• To reboot (or restart) the gateway, press the indented Reset button once
using the end of a paper clip or other small object with a narrow tip, and
then release.
• To reset the gateway configuration back to the factory default settings,
press and hold the indented Reset button for 15 seconds using the end
of a paper clip or other small object with a narrow tip, and then release.
See Reset Your Gateway Settings for more information on an alternative
method to reset the gateway settings using the SBG6400 Web Manager.
WARNING! Resetting to factory defaults also deletes any custom
gateway configurations, including your user passwords and other
security settings. You should back up the gateway configuration files
before resetting the gateway. See Back Up Your Gateway Configuration
for more information.