Argox Ethernet printer - Manual (Page 39)

Ethernet Printer Technical Manual November 10, 2010
39
10.4 OS-2130DE Ethernet Card Replacement
1. Turn off the printer power; unplug the power cable and the USB/Ethernet/Serial cable.
2. Remove the top cover.
3. Remove the 2 screws on the base housing.
4. Remove the whole print head assembly by releasing the 4 screws on its feet.
5. Remove the 3 screws which fix the Ethernet card as shown in the illustration below.
Figure 10.4.1
6. Place the new Ethernet card to its original position.
7. Secure the 3 screws to fix the Ethernet card.
8. Secure the 4 screws to fix “Printer Chassis” to the bottom.
9. Secure the 2 screws on the bottom of the printer.
10. Press and click “Power Switch” on the switch hole located on the “Middle Cover”.