Argox Ethernet printer User Manual
Page 15
Ethernet Printer Technical Manual November 10, 2010
15
address; otherwise this will delay the time for the printer to get ready.
B. Using the Ethernet card static IP address
Connect the printer and the PC using the cable. Turn on the printer and wait for about 1 minute. The
printer will automatically get the default IP addresses (192.168.1.100). The default IP address can be
modified, make sure that it connects correctly: the first 3 sections of the PC IP address should be the
same with the printer IP address (ex. 192.168.1.xxx). The subnet mask should be 255.255.255.0.
C. Send additional commands to set the IP address through other
communication interface (USB, RS-232 etc.)