Argox Ethernet printer User Manual
Page 28
Ethernet Printer Technical Manual November 10, 2010
28
7. LCD Ethernet Setting
LCD Function
Display
Function Options
Description
1 DHCP
DISABLE
If printer is not connected to a router, with
DHCP disabled, settings of IP ADDRESS,
SUBNET MASK, and DEFAULT
GATEWAY settings will be available on
LCD.
If DISABLE is changed to be ENABLE,
LCD will prompt “ETHERNET CARD
UPDATE FINISH…”
Then please reboot the printer.
ENABLE
If printer has been connected to a router,
IP address will be assigned automatically
by DHCP server after power on.
If ENABLE is changed to be DISABLE,
and then again set back as ENABLE, LCD
will prompt “ETHERNET CARD UPDATE
FINISH…”
Then please reboot the printer.
2 IP ADDRESS
xxx.xxx.xxx.xxx
xxx range:0~255
When DHCP is disabled, default IP
address is 192.168.1.100.
If “_” sign appears, it means that the DHCP
setting is disabled. If not, DHCP setting is
enabled.
1. FEED/CONFIG. : change contents.
(i.e. from 000.000.000.000 to
255.255.255.255)
2. PAUSE/CALIBR. : shift “_”sign position.
(i.e. from 255.255.255.255 to
255.255.255.255)
3. CANCEL/RESET.: view next function
option. (“_” sign must be on the third
word, for example, xxx).
4. To change IP ADDRESS or
3 SUBNET MASK
xxx.xxx.xxx.xxx
4 DEFAULT
GATEWAY
xxx.xxx.xxx.xxx