AGI Security SYS-HC0451S2 - Manual (Page 191)

181
Figure 4-125
On the navigation bar, you can see the Favorites shortcut menu. You can select from the dropdown list.
Click View 1, you can see the channel(s) you saved on the Favorites folder. See Figure 4-126.
Figure 4-126
4.10.5.3 PTZ
The pan/tilt/zoom setup includes the following items. Please select channel first. See Figure 4-127.
 PTZ type: There are two options: local/remote. Please select remote if you are connecting to the
network PTZ. See Figure 4-128.
 Control mode: You can select control mode from the dropdown list. There ar e two options:
Serial/HDCVI. For HDCVI series product, please select HDCVI. The control signal is sent to the PT Z
via the coaxial cable. For the serial mode, the control signal is sent to the PT Z via the RS485 port.
 Protocol: Please select corresponding protocols such as PELCOD.
 Address: input corresponding PTZ address.
 Baud rate: Select baud rate.
 Data bit: Select data bit.
 Stop bit: Select stop bit.
 Parity: There are three choices: none/odd/even.
After completed all the setups please click save button, system goes back to the previous menu.