AGI Security SYS-HC0451S2 - Manual (Page 138)

128
4.10.1.1.4 Remote Upgrade
It is to update the camera.
From main menu->setting->camera->remote, the interface is shown as below. See Figure 4-53.
Click Browse button and then select the upgrade file. Then select a channel (or you can select device
type filter to select several devices at the same time.)
Click Start upgrade button to update. You can see the corresponding dialogue once the upgrade is finish.
Figure 4-53
4.10.1.2 Camera
For analog channel, the camera interface is shown as in Figure 4-54. For digital channel, the
camera interface is shown as in Figure 4-55.
 Channel: Select a channel from the dropdown list.
 Saturation: It is to adjust monitor window saturation. The value ranges from 0 to 100. The default
value is 50. The larger the number , the strong the color is. This value has no effect on the general
brightness of the whole video. The video color may become too strong if the value is too high. For
the grey part of the video, the distortion may occur if the white balance is not accurate. Please note
the video may not be attractive if the value is too low. The recommended value ranges from 40 to 60.
 Brightness: It is to adjust monitor window bright. The value ranges from 0 to 100. The default value
is 50. The larger the number is, the bright the video is. When you input the value here, the bright
section and the dark section of the video will be adjusted accordingly. You can use this function
when the whole video is too dark or too bright. Ple ase note the video may become hazy if the value
is too high. The recommended value ranges from 40 to 60.
 Contrast: It is to adjust monitor window contrast. The value ranges from 0 to 100. The default value
is 50. The larger the number is, the higher the contrast is. You can use this function when the whole
video bright is OK but the contrast is not proper. Please note the video may become hazy if the
value is too low. If this value is too high, the dar k section may lack brightness while the bright
section may over exposure .The recommended value ranges from 40 to 60.