AGI Security SYS-HC0451S2 - Manual (Page 141)

131
 Resolution: System supports various resolutions , you can select from the dropdown list. Please note
the option may vary due to different series.
 Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.
 Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video quality.
 Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image quality.
 Video/audio: You can enable or disable the video/audio.
 Audio format: Please select from the dropdown list. There are three options: G711a/G711u/PCM
 Audio source: Please select from the dropdown list. There are two options: normal/HDCVI. For
normal mode, the audio signal is from the Audio In port. For HDCVI mode, the audio signal is from
the coaxial cable of the camera.
Figure 4-56
4.10.1.3.2 Snapshot
Here you can set snapshot mode, picture size, quality and frequency. See Figure 4-57.
 Snapshot mode: There are two modes: regular and trigger. If you set timing mode, you need to set
snapshot frequency. If you set trigger snapshot, you need to set snapshot activat ion operation.
 Image size: Here you can set snapshot picture size.
 Image quality: Here you can set snapshot quality. The value ranges from 1 to 6.
 Interval: It is for you to set timing (schedule) snapshot interval.