Adept Smart Vision MX - Manual (Page 25)

Adept SmartVision MX User’s Guide, Rev. A
Page 25 of 34
Chapter 4: Operation
This chapter describes how to operate the SmartVision MX. Before proceeding, you need to
have performed the steps covered in the Installation chapter.
4.1 Operating Environment
l
Ambient operating temperature: 0 to 50° C (32 to 122° F)
l
Operating humidity: 10 to 90% (non-condensing)
4.2 Turning Power ON and OFF
The power button is a toggle. If the processor is on, pressing the button will turn it off. If the
processor is off, pressing the button will turn it on.
The power button is on the power side of the processor, where 24 VDC is connected. When
power is on, the ON LED will be lit.
4.3 Checking the Licenses on the Dongle
You can see what has been enabled on a dongle with the following procedure:
1. Turn on the Adept SmartVision MX industrial PC and wait for it to finish booting.
2. Double-click the Adept ACE icon on the desktop.
3. Select Create Example Workspace, then click Open.
4. Click Help > Diagnostic Summary.
Adept ACE will display a list of all options that can be licensed by the dongle, and
indicate which ones have been enabled.