Adept Smart Vision MX - Manual (Page 22)

Chapter 3: Connectors and Indicators
Power/IO Side
Input
Output
Audio RS232/485
RS232
VDC
In
Power
Button
LEDs
Figure 3-2. SmartVision MX Power-side Connectors
l
Power button
l
Digital inputs
up to 9 V tolerant
l
Digital outputs
100 mA max @ 24 VDC
l
Audio In and Audio Out ports
These are not used by Adept software.
l
RS232/RS485 port
l
RS232 port
l
Power input
9 to 36 VDC, nominal 24 VDC @ 4.2 A
l
HDD LED
l
Power ON LED
3.1 Ethernet Ports
Any of the Ethernet ports can be used to connect to Ethernet devices. Four of the ports provide
Power over Ethernet, intended to provide the power needed for a GigE camera, though they
can also be used as general-purpose Ethernet ports.
To attach the industrial PC to a network or broadband device, connect an Ethernet cable
between the device and one of the Ethernet ports on the industrial PC.
CAUTION: Do not connect the SmartVision MX to the internet.
Adept SmartVision MX User’s Guide, Rev. A
Page 22 of 34