Adept Smart Vision MX - Manual (Page 23)

Chapter 3: Connectors and Indicators
Adept recommends that you use Category 5 or better wiring and connectors for your network.
NOTE: If you are using a camera with a USB 2.0 connector or with an Ethernet con-
nector that is not designed for PoE, you will need to provide DC power to the cam-
era through a separate cable.
3.2 USB Ports
For a USB 3.0 camera, use one of the USB 3.0 ports.
To attach a USB peripheral, plug the peripheral cable into any one of the USB ports on the
SmartVision MX industrial PC.
NOTE: The bottom-right USB 2.0 port is used for the license dongle, which is
needed for the industrial PC to function. Do not remove the dongle.
3.3 DVI- Ports
A monitor will only be needed for OS upgrades in the field, and is not commonly used. To con-
nect a monitor with a DVI connector:
l
Connect the monitor to the DVI-I port on the SmartVision MX
or
l
Connect the monitor to the DVI-D port on the SmartVision MX.
Connecting a VGA monitor requires using the DVI-I port with a user-supplied VGA adapter.
3.4 I/O Connections
8 inputs and 8 outputs are available.
3.5 Audio and Serial Ports
The Audio In, Audio Out, and the two RS232(/485) ports are fully functional, but are not used
for Adept vision processing.
Adept SmartVision MX User’s Guide, Rev. A
Page 23 of 34