Zilog ZUSBOPTS - Manual (Page 46)

UM025603-0814 Establish A WiFi Connection
Zilog Educational Shields
User Manual
39
Listen on 80

11. On the MODULE 1 console, enter the open 169.254.1.2 80 command, and press
Enter. The following message will appear on both console terminals:
*OPEN**HELLO*
The GREEN status LED on both shields will also illuminate without blinking.
12. Enter the Ctrl-D command on both consoles to exit the RN-171 command mode and
enter the Platform’s command shell. The YELLOW status LED will blink once, and
the
ZEdulab> prompt will appear.
13. At the ZEdulab> prompt on the MODULE 1 console, enter the wredirect com-
mand, then press Enter; the result is shown in Figure 38.
14. On the MODULE 2 console, enter the wremotehost command, then press Enter. The
following message will appear on the MODULE 2 console, as shown in Figure 39.
A Remote Host Mode Initiated….Ctrl-D to exit…
Figure 38. Client wredirect Command