Zilog ZUSBOPTS - Manual (Page 41)

UM025603-0814 Establish A WiFi Connection
Zilog Educational Shields
User Manual
34
Alternatively, this WiFi link can be established by using one Educational Platform and one
ZED WLAN Shield.
1. Begin configuring the system shown in Figure 9 on page 10 by entering the start-
shield wlan command at each of the two console prompts. Press the Enter key on
each console. A WLAN Shield started! message will appear on both consoles.
Enter the ? symbol on one of the consoles to list all of the available ZED WLAN
Shield commands; see Figure 32.
2. On MODULE 1, enter the wcmd command and press Enter to access the RN-171 com-
mand mode. A <2.32> prompt will appear, as shown in Figure 33.
Commands to the RN-171 Module are case-sensitive.
Figure 32. WLAN Command List for Both Shields
Note:
Note: