Xtramus NuApps-IGMP-RM V1.2 - Manual (Page 59)

6.7. Test Report _Group Capacity Test
The test result for Group Capacity Test is shown on the Test Config window from the System
Info/Configuration List. The result of the maximum pass group capacity is shown by the red rectangle for
each test pair.
6.8. Test Report _Group Join/Leave Latency Test
The test result for Group Join/Leave Latency Test is shown on the Test Config window from the System
Info/Configuration List. You must select the Enable Measure Join Delay and Enable Measure Leave
Delay for system to display the average delay time for respectively Join and Leave group. Those result is
shown by the red rectangle for each test pair.
59
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®