Xtramus NuApps-IGMP-RM V1.2 - Manual (Page 33)

5. NuApps-IGMP-RM Test Modes
The NuApps-IGMP-RM supports 6 test modes: Mixed Class Throughput, Aggregated Multicast
Throughput, Scaled Group Forwarding, Latency Test, Group Capacity Test, Group Join/Leave
Latency Test and IGMP V3 Source Filter Test.
After selecting the module cards’ port(s), as previous described on 4. Creating Task via Testing
Configuration, please refer to the section down below for detailed description of each test modes and
theirs respectively setting options.
5.1. Mixed Class Throughput
The objective of this test mode is to determine the throughput of a Device or System under test (DUT or
SUT) when both unicast class frames and multicast class frames are offered simultaneously to a fixed
number of interfaces.
This test also measures the DUT’s ability to operate heterogeneous traffic stream, source port sending an
aggregated traffic stream which consists of a mixture of unicast and multicast packets to every destination
ports.
Port setting
Source Pair
You can choose the previous set Test Pair to be used on the Mixed Class
Throughput test.
Unicast Port You can select a port for unicast test.
33
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®