Xtramus NuApps-IGMP-RM V1.2 - Manual (Page 25)

Test Config
Group Capacity
Test
The objective of this test is to determine the
maximum number of multicast groups a
device or system under test can support
while maintaining the ability to forward
multicast frames to all multicast groups
registered to that device or system under
test.
For more detail description about this test,
please refer to 5.5. Group Capacity Test.
Group
Join/Leave
Latency Test
The objective of this test is to determine the
time duration it takes a device or system
under test to process a successful IGMP
group membership report (leave report).
For more detail description about this test,
please refer to 5.6. Group Join/Leave
Latency Test.
IGMP V3
Source Filter
Test
The objective of this test is to compare if the
quantity of packet received by host port is
the same as the predicted quantity to
evaluate the operation of the DUT.
For more detail description about this test,
please refer to 5.7. IGMP V3 Source Filter
Test.
Report
By clicking the Report on the System Info/Configuration List, it will pop up a window showing the test
result of your tasks.
25
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®