Xtramus NuApps-IGMP-RM V1.2 - Manual (Page 39)

5.3. Scaled Group Forwarding
The objective of this test mode is to determine the forwarding rate as a function of tested multicast groups
for a fixed number of tested device or system under test (DUT or SUT) ports.
The destination test port(s) join an initial number of multicast groups on the first iteration to measure the
maximum non-drop provided load. The number of multicast groups joined by each destination test port is
then scaled in following iterations and the forwarding rate is measured.
Note: the total number of multicast groups joined must not exceed the multicast group capacity of the
DUT/SUT.
Port setting
Source Pair
You can choose the previous set Test Pair to be used on the Scaled Group
Forwarding test.
39
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®