Xtramus NuApps-IGMP-RM V1.2 User Manual

Page 35

Available Port Information

Module Name

The name of the current module card under this test mode.

It is based on

(chassis number, module card’ slot, port number).

MAC address

The MAC address of the current module card’s ports.

VLAN enable

You can choose to Enable or Disable the VLAN function.

VLAN ID

If you enable the VLAN function, you will be able to set the VLAN ID here.

CFI

Enable or Disable the Canonical Format Indicator (CFI) function.

VLAN Priority

If you enable the VLAN function, you will be able to set the VLAN Priority here,
in which the range is between 0-7.

IP Address

Set the IP address for the current port.

Gateway IP

Set the IP of your Gateway.

Mask

Set the Subnet Mask here.

Current

LinkStatus

Shows the current link status in speed/duplex/autonegotiation.

Media Speed

Set the media speed of your module card.

Duplex

Set the Duplex for Full or Half.

Autonegotiation

Set the as Auto negotiate or Force the system to run task on the set media
speed.

Group IP

Shows the IP address of the group under test.

Number of Group Shows the number of group under test.

Setting Categories

All

Shows all the available port information.

Basic

Shows only Current Link Status, Media Speed, Duplex and Autonegotiation
information.

Protocol

Shows only Protocol, MAC address, VLAN enable, VLAN ID and CFI
information.

IGMP Setting

Shows only Group IP and Number of Group information.

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES