Xtramus NuApps-IGMP-RM V1.2 - Manual (Page 43)

Test Configuration
Test Duration (sec) The duration of time (in seconds) for the test.
Number of Trails The number of times of the test.
Test Control
Delay Time After
Test Start (sec)
The time interval for starting a test.
Starting from
Set the initial frame size (bytes) here. The default
setting is 64 bytes.
Stopping at
Set the final frame size (bytes) here. The default setting
is 64 bytes.
Frame size step The frame size to be added on every cycle.
Custom/Edit…
Activating the Custom function will activate the settings
made on Edit…. The Edit… option includes settings for
Frame Size, Initial Rate, Min. Rate, Max. Rate and
Resolution.
Frame Control
(size)
Frame Payload
The Frame Payload includes: Random, Increase,
0x55AA, 0x00FF, All 1 and All 0.
Initial Rate (%) The initial packet loading in percentage.
Step Rate (%) The rate percentage to be added on every cycle. Load Control
Max Rate (%) The maximum packet loading in percentage.
IGMP Version
There are version 1, version 2 and version 3 as option.
The version 1 only support membership query and
report (Join), the version 2 support both Join and Leave.
IGMP Control
Delay Time After
Join (sec)
The time interval for sending the Join packets.
43
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®