WaveWare Adaptive Remote - Manual (Page 30)

BetaBrite Programming Manual (pn 9703-6020) November 4, 2003
30 Advanced text messaging
Advanced text messaging
Before attempting the following, make sure you’re familiar with the
previous examples in the “Beginning text messaging” section of this
manual.
Example 6 — Displaying the time and date
NOTE: Because the time and date are not updated when the sign is
off, the time and date must be re-programmed each time the
sign is turned off and on.
Step When you do this . . . You see this . . .
In this example, we’ll create a message that continuously displays the current time and date:
1
Delete all the messages currently stored in the sign.
(See “Example 5 — Deleting messages” on page 29.)
2 Press PROGRAM.
3 Press SELECT.
4 Press A.
5
Press MODE to select a
“mode”. (Modes are used
to change the way a
message appears. See
Appendix A for a list of the
modes available.)
6
Press SELECT until the Roll
Down — [RL
↓
] — mode
appears.
Advertising
THEN
Rosco
The time will be displayed
in wide letters.
3:26 PM
THEN
Jan. 19, 2006
THEN
PROG TEXT A
PROG TEXT ?
A]
A] [HLD]
This stands for Hold mode.
A] [RL ↓ ]
This stands for Roll Down mode.