WaveWare Adaptive Remote - Manual (Page 22)

BetaBrite Programming Manual (pn 9703-6020) November 4, 2003
22 Beginning text messaging
Example 2 — Displaying messages in file name order (A, B, C, . . .)
Once you’ve programmed messages into the sign, you may want to
set the order or sequence in which messages appear.
In this example, we’ll display messages by their file name (A, B, C,
and so on.) or in alphabetical order.
Step When you do this . . . You see this . . .
This example continues where Example 1 left off.
This example assumes that there are two messages (files A and B) in the sign:
File A = THIS IS YOUR FIRST MESSAGE
File B = This is your second message
1 Press PROGRAM.
2 Press RUN.
3
If RUN appears on the sign,
go to the next step.
Otherwise, press SELECT
until RUN appears.
4 Press B.
5 Press RUN.
You have just programmed the sign to run only message file B.
Next, we’ll program the sign to display message B and then message A.
6 Press PROGRAM.
7 Press RUN.
PROG TEXT B
RUN
TIME or DEMO may also appear here.
RUN
RUN B
second
THEN
This is your
message
THEN
PROG TEXT A
RUN