WaveWare Adaptive Remote - Manual (Page 19)

November 4, 2003 BetaBrite Programming Manual (pn 9703-6020)
Basic sign operation 19
What to do when you forget a sign’s password
How to delete a sign’s password
If you no longer want to be prompted to password protect a sign, you
must clear the sign’s memory in order to delete the password. To do this,
see “Clearing a sign’s memory” on page 17.
Sound control
Normally, when you press a Remote Control key while programming
a sign, the sign will beep.
If you want to turn the beeping off, hold down FCN and then press
FONT . (To turn the beeping on again, repeat this.)
Step When you do this . . . You see this . . .
1 Press PROGRAM.
2 Press L six times.
3 Enter a new password.
ENTER PASSWORD
******
PROG TEXT A
CORRECT
THEN