WaveWare Adaptive Remote - Manual (Page 21)

November 4, 2003 BetaBrite Programming Manual (pn 9703-6020)
Beginning text messaging 21
4 Press RUN twice.
Now that the first message is done, we’ll enter a second message which contains upper and
lowercase characters.
5 Press PROGRAM again.
6 Press SELECT.
7 Press B.
8
Type T.
Hold down FCN and then
press MODE to switch to
lowercase letters.
Type his is your second
message.
9 Press RUN twice.
FIRST MESSAGE
THEN
THIS IS YOUR
Because Automode [AUT] was used in your message (see Step
3), the text of your message will be displayed in a variety of
formats. For example, one of the formats (or modes) called
Scroll moves your message from the bottom to the top of the
sign.
PROG TEXT A
PROG TEXT ?
The A changes to a question mark (?) after pressing SELECT.
B]
“B” is now the file name of your second message. If you
pressed A instead of B, you would have written over the first
message.
B]cond message
Your message should look like this when you’re done typing.
second
THEN
This is your
message
THEN
You should notice that...
• The first message does not appear at all. (We’ll fix this in
the following example.)