TVLogic LUM-300W - Manual (Page 8)

14 4K LCD Monitor 4K LCD Monitor 15
[3] COLOR
5. Menu Operations
●
COLOR TEMP
- Controls the color temperature and allows
instant access to preset the color temperature
settings.
- Available color temperatures are 6500K,
9300K, CUSTOM1/2/3, 3200K, 5000K and
5600K.
- In CUSTOM 1/2/3 modes, user can define
custom RGB GAIN, BIAS (=Offset) and Color
Copy values.
- Backlight value is adjustable for each color
temperature.
●
GAIN RED
- Used to set Red Gain(or Picture, Contrast)
level from -256 to 255.
- Adjusts the red color of bright section.
- Only available in CUSTOM 1/2/3 mode.
●
GAIN GREEN
- Used to set Green Gain(or Picture, Contrast)
level from -256 to 255.
- Adjusts the green color of bright section.
- Only available in CUSTOM 1/2/3 mode.
●
GAIN BLUE
- Used to set Blue Gain(or Picture, Contrast)
level from -256 to 255.
- Adjusts the blue color of bright section.
- Only available in CUSTOM 1/2/3 mode.
●
BIAS RED
- Used to set Red Bias(or Offset, mainly affects
on Black level) from -100 to 100.
- Adjusts the red color of dark section.
- Only available in CUSTOM 1/2/3 mode.
●
BIAS GREEN
- Used to set Green Bias(or Offset, mainly
affects on Black level) from -100 to 100.
- Adjusts the green color of dark section.
- Only available in CUSTOM 1/2/3 mode.
●
BIAS BLUE
- Used to set Blue Bias(or Offset, mainly affects
on Black level) from -100 to 100.
- Adjusts the blue color of dark section.
- Only available in CUSTOM 1/2/3 mode.
●
COLOR COPY
- Used to copy the R/G/B Gain value of pre-
stored color temperature settings.
- In User mode, find and select the color
temperature to be used with the Up/DOWN
button and press the Enter button to copy and
apply the Gain value to GAIN RED, GAIN
GREEN, GAIN BLUE.
- Only available in CUSTOM 1/2/3 mode.
PAGE I >> PAGE II
COLOR TEMP
GAIN RED
GAIN GREEN
GAIN BLUE
BIAS RED
BIAS GREEN
BIAS BLUE
COLOR COPY
6500K
0
0
0
0
0
0
6500K
LUM-300W SDI A 1080/60i
●
BACK LIGHT
- Used to control the backlight level of the
LCD panel.
- Available values are between MIN(0) and
MAX(255). Higher value means brighter
screen.
●
COLOR SPACE
- Used to select color space and the mode will
be changed as the following sequence.
: NATIVE COLOR -> REC-709(sRGB) -> LUT
SMPTE-C -> LUT EBU -> LUT D-CINEMA
●
GAMMA CURVE
- This item is used when user want to change
the Gamma curve as he/she wishes between
1.00 and 3.00. (0.05 STEP CONTROL)
[3] COLOR [4] DISPLAY
5. Menu Operations
PAGE II >> PAGE I
BACK LIGHT
COLOR SPACE
GAMMA CURVE
50
NATIVE COLOR
2.20
LUM-300W SDI A 1080/60i
●
HD DISPLAY MODE
- Used to control the display ratio in HD mode.
- Available values are 16:9, 1.85:1 and 2.35:1.
●
FOCUS ASSIST COLOR
- Used to select a color for Focus Assist among
red, green and blue.
●
FOCUS ASSIST LEVEL
- Used to set the edge difference value
between the edges in an image.
- Available values are from 0 to 100. Larger
value means more sophisticated detail
detection.
- Designated color is displayed when the
difference of the edges exceeds the
previously set value.
- This feature is available only when the Focus
Assist mode is activated.
LUM-300W SDI A
HD DISPLAY MODE
FOCUS ASSIST COLOR
FOCUS ASSIST LEVEL
16:9
RED
0
1080/60i