TVLogic LUM-300W - Manual (Page 10)

18 4K LCD Monitor 4K LCD Monitor 19
[5] GPI
5. Menu Operations
Bit 1
(Tally2)
Bit 1
(Tally1)
Operation
0 0
CHANNEL1
0 1
CHANNEL1
1 0
CHANNEL1
1 1
CHANNEL1
Bit 1
(Tally4)
Bit 1
(Tally3)
Operation
0 0
CHANNEL1
0 1
CHANNEL1
1 0
CHANNEL1
1 1
CHANNEL1
The following appearance of UMD DISPLAY is set as D-UMD(D-8C), D-UMD TALLY TYPE
and TALLY1 ~ TALLY4 COLOR.
D-UMD TALLY TYPE USER COLOR
TALLY1 COLOR RED
TALLY2 COLOR GREEN
TALLY3 COLOR RED
TALLY4 COLOR YELLOW
CHANNEL1 CHANNEL1
●
Tally Type - Default
- S-8C(Single 8 Character) & S-16C(Single 16 Character)
●
D-UMD TALLY TPYE – USER COLOR
- Color selections between TALLY1 ~ TALLY4.
- D-8C(Dual 8 Character)
●
GROUP ID
- Used to control several monitors in a group
for the TVLogic control protocol using RS-
422/485 communication.
- Available values are 0 ~15.
●
MONITOR ID
- This item sets the ID of each monitor for the
TVLogic control protocol using RS-422/485
communication.
- Available values are 0~127.
●
DHCP
- Used to activate/deactivate the DHCP
function.
●
IP ADDRESS
- Used to set the IP Address connected to a
Monitor.
●
SUBNET MASK
- Used to set the SUBNET MASK connected to
a Monitor.
●
GAETWAY
- Used to set the GATEWAY number connected
to a Monitor.
●
PORT NO
- Used to set the port number.
●
NETWORK SETTING APPLY
- Use to apply changed value of IP ADDRESS,
SUBNET MASK, GATEWAY and PORT NO.
LUM-300W SDI A
[5] GPI
5. Menu Operations
PAGE II >> PAGE I
GROUP ID
MONITOR ID
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
PORT NO
NETWORK SETTINGS APPLY
0
0
OFF
192.168.123. 0
255.255.128. 0
0. 0. 0. 0
10262
ON
1080/60i