TVLogic LUM-300W - Manual (Page 7)

12 4K LCD Monitor 4K LCD Monitor 13
●
You may control various functions using
MENU, UP/DOWN and ENTER buttons on
the bottom front of the monitor.
●
The product may be controlled and set
system-wise through OSD displayed on
the screen.
1. Press MENU button to activate the OSD
menu on the screen.
2. Move to a desired sub-menu with the UP/
DOWN button.
3. After selecting a sub-menu, press ENTER
button to select an item with UP/DOWN
button.
4. Press ENTER button to select the desired
item.
(The selected sub-menu will be highlighted.)
5. Press ENTER button to save the new value
after adjusting the value with UP/DOWN
button.
6. Press MENU button once to return to
previous menu and if there is no previous
menu, the OSD menu will be removed from
the screen.
7. To view next page in the sub menu, press
ENTER button at PAGE I >> PAGE II.
[1] Menu Tree
[2] Menu Control
[3] Menu Control Sequence
4. Menu Tree & Adjustment
LUM-300W SDI A
BRIGHT
CONTRAST
CHROMA
APERTURE
0
0
0
0
A. Current input signal (Indicates as UD XXX
in UD mode)
B. Model name(LUM-300W).
C. Current input signal resolution.
[4] Main Menu Window inforrmation
BRIGHT
CONTRAST
CHROMA
APERTURE
0
0
0
0
A B C
LUM-300W 1080/60i SDI A
5. Menu Operations
●
BRIGHT
- Used to set the brightness(=offset) level from
-100 to 100.
●
CONTRAST
- Used to set the contrast(gain) level from -100
to 100.
●
CHROMA
- Used to set the saturation level from -50 to
50.
●
APERTURE
- Used to set the picture sharpness level from
0 to 25.
[1] PICTURE [2] VIDEO
●
DITHERING
-Used to activate/deactivate the 10bit
Dithering function.
●
FILM MODE DETECTION
- Used to activate/deactivate the Film mode
function.
●
FORCE psf
- This function is not supported.
●
VIDEO RANGE SELECT
- Used to select the range of brightness.
* LIMITED(EX) : Output : 16 ~ 255 (HDMI/SDI)
* FULL : Output : 0 ~ 255 (HDMI/SDI)
* LIMITED : Output : 16 ~ 235(SDI)
* EXTENTION : Input : 16 ~ 235 Output : 0 ~
255 (HDMI)
- In the HDMI mode, activates only when the
color format is RGB.
(When the color format is YCbCr, operates
only within the limited range.)
●
3G FORMAT
- Selects input format for SDI 3G A/B support
(NORMAL MODE, A 444 10BIT_YCbCr,
A 444 10BIT_RGB, A 444 12BIT_YCbCr, A
444 12BIT_RGB, A 422 12BIT_YCbCr, B 444
10/12BIT_YCbCr, B 444 10/12BIT_RGB, B 422
12BIT_YCbCr, B 422 10BIT_YCbCr, 60P).
- Automatically detects when Payload signal
appears in normal mode.
LUM-300W SDI A
BRIGHT
CONTRAST
CHROMA
APERTURE
0
0
0
0
1080/60i LUM-300W SDI A
DITHERING
FILM MODE DETECTION
FORCE psf
VIDEO RANGE SELECT
3G FORMAT
OFF
OFF
ON
LIMITED(EX
NORMAL MODE
1080/60i