TVLogic LUM-300W - Manual (Page 3)

4 4K LCD Monitor 4K LCD Monitor 5
1. Caution
●
Always use set voltage.
●
AC 100 ~ 240V
●
DC 24V
• All operating instructions must be read and
understood before the product is operated.
• These safety and operating instructions must
be kept in safe place for future reference.
• All warnings on the product and in the
instructions must be observed closely.
• All operating instructions must be followed.
• Do not use attachments not recommended
by the manufacturer. Use of inadequate
attachments can result in accidents.
• This product must be operated on a power
source specified on the specification label.
If you are not sure of the type of power supply
used in your home, consult your dealer or local
power company. For units designed to operate
on batteries or another power source, refer to
the operating instructions.
• The power cords must be routed properly
to prevent people from stepping on them or
objects from resting on them. Check the cords
at the plugs and product.
• Do not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
• Never insert an object into the product
through vents or openings. High voltage flows
in the product, and inserting an object can
cause electric shock and/or short internal parts.
For the same reason, do not spill water or liquid
on the product.
• Do not attempt to service the product
yourself. Removing covers can expose you to
high voltage and other dangerous conditions.
Request a qualified service person to perform
servicing.
• If any of the following conditions occurs, unplug
the power cord from the DC outlet, and request
a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid was spilled on the product or
when objects have fallen into the product.
c. When the product has been exposed to rain
or water.
d. When the product does not operate
properly as described in the operating
instructions. Do not touch the controls other
than those described in the operating
instructions. Improper adjustment of
controls not described in the instructions
can cause damage, which often requires
extensive adjustment work by a qualified
technician.
e. When the product has been dropped or
damaged.
f. When the product displays an abnormal
condition. Any noticeable abnormality in the
product indicates that the product needs
servicing.
• In case the product needs replacement parts,
make sure that the service person uses
replacement parts specified by the manufacturer,
or those with the same characteristics and
performance as the original parts. Use of
unauthorized parts can result in fire, electric
shock and/or other danger.
• Upon completion of service or repair work,
request the service technician to perform safety
checks to ensure that the product is in proper
operating condition.
1. Caution
• When mounting the product on a wall or ceiling,
be sure to install the product according to the
method recommended by the manufacturer.
• Unplug the power cord from the DC outlet
before cleaning the product. Use a damp cloth
to clean the product. Do not use liquid cleaners
or aerosol cleaners.
• Unplug the power cord from the AC outlet if
you do not use the product for considerably
long time.
• Do not use the product near water, such as
bathtub, washbasin, kitchen sink and laundry
tub, swimming pool and in a wet basement.
• Keep the product away from direct rays of the
Sun-light.
• Do not place the product on an unstable cart,
stand, tripod or table. Placing the product on an
unstable base can cause the product to fall,
resulting in serious personal injuries as well as
damage to the product. Use only a cart, stand,
tripod, bracket or table recommended by the
manufacturer or sold with the product. When
mounting the product on a wall, be sure to
follow the manufacturer’s instruction. Use only
the mounting hardware recommended by the
manufacturer.
• When relocating the product placed on a cart, it
must be moved with the utmost care.
• Sudden stops, excessive force and uneven
floor surface can cause the product to fall from
the cart.
• The vents and other openings in the
cabinet are designed for ventilation. Do not
cover or block these vents and openings since
insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation
openings. This product is not designed for
built-in installation; do not place the product
in an enclosed place such as a bookcase or
rack, unless proper ventilation is provided
or the manufacturer’s instructions are
followed.
• In case of installation the product on the rack,
the inside of the product would be overheated
due to heat from other devices near by and
the decrease of air circulation, which could
damage to the monitor. To prevent the
damage, please have enough space for the
monitors and use fan to avoid heat and maintain
the operating temperature. (Refer to the
specication of the product).
• The OLED panel used in this product is made of
glass. Therefore, it can break when the product
is dropped or applied with impact. Be careful
not to be injured by broken glass pieces in case
the OLED panel breaks.
• Keep the product away from heat sources
such as radiators, heaters, stoves and other heat
generating products (including amplifiers).