Active digitizer mode (a7330d only) – TabletKiosk eo a7330 Ultra-Mobile User Manual
Page 22

Chapter 01: Getting Started
7
Tapping lightly on the screen will perform a standard left mouse
button click. Holding the tip of the pen against the screen with-
out moving it for about a second or so will perform a standard
right mouse button click.
Active Digitizer mode (a7330D only)
The eo a7330D dual mode screen is auto-sensing. The screen will
default to touch screen mode until is senses that the stylus pen
is near the screen. Once the pen is close enough to the screen to
be detected, the eo a7330 will automatically switch to digitizer
mode.
Hold the stylus pen as if you were writing with a standard pen.
Place the tip of the stylus just above the screen and move it
around. The pointer should follow the tip of the pen. In this
mode your hand may rest on the screen, since this will not affect
the behavior of the pointer.
TIP: When trying to select or activate something on the screen with
the stylus pen, pay attention to the position of the pointer icon instead
of the tip of the pen.
Tapping lightly on the screen with the tip of the stylus will
perform a standard left mouse click. If you want to perform a
right mouse click, press and hold down the tip of the stylus
lightly on the screen. In a moment, an animated icon will draw
around the pointer. Lift the stylus from the screen to complete
the button press.
NOTE: Animated
cues, or floating
tablet tips, will
only appear in the
Active Digitizer
mode if your Sahara
Slate PC is running
Windows XP
Tablet PC Edition or
Windows Vista.