TabletKiosk eo a7330 Ultra-Mobile - Manual (Page 18)

Chapter 01: Getting Started 3
matching grooves on the eo just beside the power input
pins. Then lay down the
opposite side of the battery
into the slot until it “clicks”
into place.
To Remove the Main Lithium-Ion
Battery Pack
Turn over the tablet and place
it on a solid, clean flat surface.
Slide the battery release latch
away from the battery and hold it there. Use your other hand
to carefully lift up the side of the battery near the latch. Once
clear of the latch, you can release it and use both hands to lift
the battery up and away from the opposite side that holds the
retaining tabs into place.
Inserting the Secondary Lithium-Polymer Battery Pack
Align the battery so that the power output port on the bottom
of the battery matches up with the power input pins on the back
of the a7330. Angle the battery slightly down and place it in the
battery slot so that the battery’s small retaining tabs fit into the
matching grooves on the eo just above the power input pins.
Then lay down the opposite side of the battery into the slot until
it “clicks” into place.
!
@