TabletKiosk eo a7330 Ultra-Mobile - Manual (Page 20)

Chapter 01: Getting Started 5
the adapter plug is securely in place, plug the power cord into an
external power socket.
NOTE: When you first connect the tablet into an external power
source, the battery charge indicator will begin to glow amber. When
the battery is fully charged the indicator will turn green. See the
section entitled Battery Care for tips on maximizing battery life and
performance.
Step 3: Connecting Applicable Peripherals and Networking Cables
If you would like to use any external peripheral with the tablet
(i.e. USB mouse, USB keyboard, etc.) or are planning to connect
to the Internet and/or a corporate LAN using a wired connection
(RJ45) as opposed to wirelessly, connect the external peripheral
now. See the chapter entitled Touring Your eo Ultra-Mobile PC, to
identify which ports to use.
IMPORTANT: When you power on the a7330T for the first time, you
will need to have an external USB keyboard connected in order to
complete the Windows XP Professional installation routine. The
a7330D can use the on-screen keyboard in Active Digitizer mode.
Step 4: Powering on the eo Ultra-Mobile PC
Locate the three power switches on the top on the tablet. The
switch is the computer’s main power toggle. Slide it to the
right and hold it there until it emits a blue glow (about 1-2
seconds) and then release it. The eo Ultra-Mobile PC will now
boot up.