Proceed PAV User Manual
Page 62
62
channel control
“punch-through”
You can program the remote so that either the Sat or Cable Channel Controls
(
channel +
or
channel –
) will also operate in other modes on the remote control.
NOTE:
When this feature is active, the SAT or Cable
channel +
or
channel –
will
override any existing channel controls in that mode.
To program the remote for Channel Control Punch-Through, follow these steps:
1
Press the Device button for the device you wish to have associ-
ated with the volume control (e.g.,
sat
or
cbl
.) and the
mute
button simultaneously.
SET
will appear in the LCD.
2
Press the
adjust –
button.
PUNCH
will appear in the LCD.
3
Press either the
sat
Device button to set-up for the SAT Chan-
nel Control or the
cbl
Device button to set-up for the Cable
Channel Control. Either
SAT
or
CBL
will flash in the LCD,
depending on the Device button selected.
SAT or Cable Channel Controls will now override the original
channel +
and
channel –
in this mode.
To return to the original setting, follow these steps:
1
Select the mode that you want to turn off the Channel Control
“Punch-Through” and press the corresponding Device button
and the
mute
button simultaneously.
SET
will appear in the
LCD.
2
Press the
adjust –
button.
PUNCH
will appear in the LCD.
3
Press the same Device button again. The Device mode will
flash in the LCD.
The SAT or Cable Channel Control “Punch-Through” is now turned off. The
CHANNEL UP and DOWN of the original device will operate on the remote
control.
transport control
“punch-through”
You can set up your remote control so that VCR or CD Transport Controls (Play,
Stop, Fast Forward, Rewind, Pause and Record) will also operate in other modes
on the remote control. An example would be to control your VCR functions
while operating the remote control in the
tv
mode.
NOTE:
When this feature is active, the VCR or CD functions (Play, Stop, Fast
Forward, Rewind, Pause and Record) will override any existing functions
preassigned to these buttons in than mode.
To program the remote for Transport Control Punch-Through, follow these steps:
1
Press the Device button for the device you wish to have associ-
ated with the volume control (e.g.,
tv
or
sat
.) and the
mute
button simultaneously.
SET
will appear in the LCD.
2
Press the
play
button.
PUNCH
will appear in the LCD.