Pinnacle Systems DR - Manual (Page 5)

We will not supply individual component parts of any
circuit board but will supply the individual circuit board
complete. Individual detectors or emitters are available
as a complete tested unit.
WARNING: The entire machine safety system must
be tested at the start of every shift. Machine testing
should include: (1) proper machine operation and
stopping capability; and (2) verifi cation of proper
installation and settings of all point of operation
guards and devices before the operation is released
for production.
FILL THIS INFORMATION OUT IMMEDIATELY
Purchase Date: _____________________________
__________________________________________
Model No.: _________________________________
__________________________________________
Options: ___________________________________
__________________________________________
Purchased From: ____________________________
Serial No.: _________________________________
Microprocessor Revision No.: __________________
This information will be needed in the event you
need assistance.