One Systems PT-10 User Manual
Page 26
One Systems, Inc. 6204 Gardendale Dr., Nashville, TN 37215
26
PT-30 EYE BOLT AIMING LOCATIONS
Make sure to use the appropriate combination of Link parts to insure proper connection
between the Pole Mount System and the specific One Systems enclosure. The required
combination of Link parts is determined by the down tilt angle of the enclosure.
The assembly may be configured with any combination of turnbuckle, chain link
sections and quick link in order to achieve the proper tension on the system, but the
turnbuckle must always be used. The figures below show a 108IM or 208CIM and PT-
30 at vertical, 24 degrees and 40 degrees using the eyebolt positions shown in the “PT-
30 EYE BOLT AIMING LOCATIONS” image. Note that Figure 8a and 8b use the same
link and turnbuckle combination but different eyebolt locations and the Figure 8c uses
chain sections as well as the quick links and the turnbuckle.
Figure 8a