One Systems PT-10 User Manual
Page 15
One Systems, Inc. 6204 Gardendale Dr., Nashville, TN 37215
15
Figure 8b
Figure 8b represents the Link with the enclosure in a 24 degree tilt. The Link is using
the top eyebolt and the turnbuckle has been adjusted to provide mild tension.
Figure 8c
Figure 8c represents the Link assembly with the enclosure in a 40 degree tilt. The Link
assembly uses the top eyebolt and the stainless steel chain has been added to achieve
the proper tension on the assembly. Notice the “dropped” chain links in Figure 8c.
Warning: If the turnbuckle assembly is turned and the loudspeaker enclosure angle
begins to change (if the down tilt angle begins to move toward 0 degrees vertical then
the turnbuckle has been OVER TIGHTENED. Turn the turnbuckle until the down tilt
angle is set by the M10 thru bolt on the pole bracket but there is still slight tension on
the turnbuckle.
Figure 9 below shows a 312CIM mounted to a PT-76a. The down tilt is 35 degrees so
the top eyebolt is utilized as per Figure 7.