One Systems Pole Mount Mini - Manual

POLE MOUNT MINI INSTALLATION
Updated 22 May 2014
The Pole Mount Mini is an easy to install and flexible system designed to allow
ONE SYSTEMS loudspeaker systems to be mounted to pole structures. The only
products approved for use with the Pole Mount Mini are the 103IM and 106IM or
transformer variants of the 103IM or 106IM.
NO OTHER LOUDSPEAKERS SHOULD BE SUBSTITUTED!
The following actions MUST be performed PRIOR to beginning the installation of
the Pole Mount System:
1. This installation guide must be completely read and understood
2. The instruction manual “Rigging and Suspension of ONE SYSTEMS
Products” must be read and understood. This instruction manual is available
at
www.onesystems.com in the “Education” section of the web site.
3. The manufacturer of the pole MUST be consulted to verify the applicability
of the Pole Mount Mini and ONE SYSTEMS loudspeaker to the specific
pole.
4. The Pole Mount Mini and loudspeaker should be installed only by one
experienced in the overhead suspension of items and familiar with the
applicable local and national codes governing installation of these products
and also governing the attachment of these products to the specific pole
structure.
5.
The Pole Mount Mini is not suitable for use in Marine environments. DO NOT
use the Pole Mount Mini with One Systems Marine grade Loudspeaker
enclosures!
CAUTION: All structures outdoors are subjected to wind forces. These forces
must be considered when suspending any product outdoors. It is necessary to
know the “Effective Projected Area” (EPA) of the loudspeaker prior to installation
of the loudspeaker and Pole Mount Mini. This data must be supplied to the pole
manufacturer in order to determine safe operation conditions for the loudspeaker
and Pole Mount Mini when mounted to a specific pole. See Appendix 1 of this
installation manual for “Equivalent Projected Area (EPA) values for the 103IM