One Systems PT-10 User Manual
Page 2
One Systems, Inc. 6204 Gardendale Dr., Nashville, TN 37215
2
PT-76a
212CIM-70/100
212IM
212IM-70/100
312CIM
312CIM-70/100
Cross Field Array (CFA)
Cross Field Array – 2 (CFA-2)
118IM Sub
PT-10 PT-30
103IM
108IM
103IM-70 108IM-70/100
103IM-100 208CIM
106IM 208CIM-70/100
106IM-70 108CIM
106IM-100
NOTE: The PT-76a and PT-38a were designed for installation on flat surfaces ONLY!
The PT-76 and PT-38 may NOT be pole mounted. Only the PT-30 is designed and
approved for pole mounting. One Systems offers the Pole Mount System-3 and the Pole
Mount System Ex-3 as well as the PT-30 for pole mounting applications. (See more
information in the PT-30 section below regarding pole mounting)
NO OTHER LOUDSPEAKERS SHOULD BE SUBSTITUTED!
The following actions MUST be performed PRIOR to beginning the installation of the
PT-76a, PT-38a, PT-30 or PT-10:
1. This installation guide must be completely read and understood
2. The instruction manual “Rigging and Suspension of ONE SYSTEMS
Products” must be read and understood. (This instruction manual is
available along with other technical papers a
under
the “Documentation” tab
3. The structure of the mating surface MUST be capable of supporting the
combined weight of the pan and tilt bracket, the loudspeaker and all
associated rigging; and must satisfy the required safety factors specified by
local and national codes, as well as safe rigging practices.
The PT-76a weighs 10.5kg (23.1 lbs). The Pt-38a weights 4.16kg (9.2 lbs).
The PT-30 weighs 4.16kg (9.2 lbs). The PT-10 weighs 0.274kg (0.6 lbs)