Startup and shutdown voltage setting – NEXCOM VTC 6200 User Manual
Page 75
Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved
62
VTC 6200 / VTC 6200-NI / VTC 6200-NI-DK User Manual
Appendix C: Vehicle Power Management Setup
Startup and Shutdown Voltage Setting
1. If the input voltage setting is 12V: set the startup voltage to 11.5V and
the shutdown voltage to 10.5V.
If the input voltage setting is 12V: set the startup voltage to 12V and the
shutdown voltage to 11V.
If the input voltage setting is 12V: set the startup voltage to 12.5V and
the shutdown voltage to 11.5V.
If the input voltage setting is 12V: set the startup voltage to 12.5V and
the shutdown voltage to 11V.
2. If the input voltage setting is 24V: set the startup voltage to 23V and
the shutdown voltage to 21V.
If the input voltage setting is 24V: set the startup voltage to 24V and the
shutdown voltage to 22V.
If the input voltage setting is 24V: set the startup voltage to 25V and the
shutdown voltage to 22V.
If the input voltage setting is 24V: set the startup voltage to 25V and the
shutdown voltage to 23V.