NEXCOM VTC 6200 - Manual (Page 50)

Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved 37 VTC 6200 / VTC 6200-NI / VTC 6200-NI-DK User Manual
Chapter 3: System Setup
Chapter 3: System Setup
Removing the Chassis Cover
2. Lift the cover upward then remove it from the chassis.
CAUTION! CAUTION! CAUTION!
Prior to removing the chassis cover, make sure the unit’s power is
off and disconnected from the power sources to prevent electric
shock or system damage.
1. The screws on the chassis are used to secure the cover to the chassis.
Remove these screws and put them in a safe place for later use.
Front View
Rear View