NEXCOM VTC 6200 - Manual (Page 16)

Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved 3 VTC 6200 / VTC 6200-NI / VTC 6200-NI-DK User Manual
Chapter 1: Product Introduction
Hardware Specifications
Main Chipset
• Intel
® ICH8M
CPU
• Intel
® Atom™ D510 Dual Core 1.6GHz
Memory
• DDR2 667/800 SDRAM
• One 200-pin SO-DIMM up to 2GB
Expansion
• Mini PCIe socket (PCIe + USB) x 1 (for WLAN module)
• Mini PCIe socket (USB) x 1 (for 3.5G module)
• 1 x Bluetooth module (optional)
• 1 x GPS module for VTC 6200 / 6200-NI; 1 x GPS module with dead
reckoning for VTC 6200-NI-DK only
• PCI-104 x 1
• SUMIT x 1 (USB + PCIe x1) - VTC 6200 only
I/O Interfaces - Front
• 5 x LEDs for power stand-by (on power button), Power Status, HDD,
WLAN/HSDPA and GPIO
• Power button
• 2 x USB ports
• 1 x SIM card socket
• 1 x system reset button
• 1 x Mic-In, 1 x Line-Out
• 4 x mounting holes SMA-type for WLAN/ HSDPA/BT
I/O Interfaces - Rear
• Mounting hole reserved:
For RF Coax to SMA Bulkhead x 1 (for GPS) reference, signal connects to
the function board
• 8V~60V wide range DC power input, power ignition signal control
• Dual VGA output (clone mode)
• 5V/1A, 12V/1A DC power output, can be controlled by S/W
• 1 x Mic-In, 1 x Line-Out
• 2 x Isolated RS232 (COM1/2) - VTC 6200 Only
2 x RS232
1 x Isolated RS485 (COM5) - VTC 6200 only
• 2 x USB 2.0
• 1 x LVDS (DB26 female connector for LVDS with backlight, control
power [+12V] and USB 2.0 x 1)
• 10/100/1000 Fast Ethernet, RJ45 with LED connector x 1
• Isolated GPIO x 1 (4 input & 4 output) - VTC 6200 only
• FUSE
Expandable Storage
• SATA 2.5” HDD Bay x 1
• SATA DOM x 1
Power Management
• Selectable boot-up & shut-down voltage for low power protection
• HW design ready for 8-level delay time on/off at user’s self configuration
• Power on/off ignition, software detectable
• Supports S3/S4 suspend mode