NEXCOM VTC 6200 User Manual
Page 20
Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved
7
VTC 6200 / VTC 6200-NI / VTC 6200-NI-DK User Manual
Chapter 1: Product Introduction
LEDs
GPIO
I/O PORT Address :
0(Off) 1(On).
COMM
WLAN/HSDPA Status
SIM Card Socket
VTC 6200 / VTC 6200-NI / VTC 6200-NI-DK can be internally integrated
with a 3.5G Mini Card module. The SIM card bracket is on the board.
When using the GPRS/UMTS/HSDPA function, insert the SIM card into the
SIM card socket. Make sure to turn off VTC 6200 / VTC 6200-NI / VTC
6200-NI-DK before inserting the SIM card.
USB Ports x2
The USB port complies with USB 2.0 specifications.
WiFi/Bluetooth Module Antenna Mounting Holes
The 3 external antenna mounting holes are used to mount and connect
WiFi antenna to a WLAN module (Mini Card type).
GPRS/UMTS/HSDPA Module Antenna Mounting Hole
The antenna mounting hole is used to mount and connect an antenna to
the GPRS/UMTS/HSDPA module.
Reset Button
Press this button to restart VTC 6200 / VTC 6200-NI / VTC 6200-NI-DK.
Line-out
Line-out is a stereo output for connecting external speakers.
Mic-in
Mic-in receives monophonic input from an external microphone.