NEXCOM VTC 6200 - Manual (Page 64)

Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved 51 VTC 6200 / VTC 6200-NI / VTC 6200-NI-DK User Manual
Chapter 3: System Setup
7. Connect one end of the SATA data cable to the SATA connector that is
on the board then connect the other end of the cable to the SATA con-
nector at the rear of the SATA drive.
SATA data cable
Cable connected
to the SATA drive
Cable connected to
the SATA connector
on the board
8. Connect one end of the SATA power cable to the SATA power connec-
tor that is on the board then connect the other end of the cable to the
SATA power connector at the rear of the SATA drive.
SATA power cable
Cable connected
to the SATA drive
Cable connected to the
SATA power connector
on the board