Configuration flow chart (embedded 64-bit os), Embedded 64-bit windows instructions – NEXCOM NDiS B842 User Manual
Page 118
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
104
NDiS B862/B842 User Manual
Appendix D: Display Continuity Installation
Embedded 64-bit Windows Instructions
1. Install the DisplayContinuity program by following the instructions on
page 91 to 98.
2. Enable Display Continuity_Delay enable by following the instructions
on page 102 to 103.
3. Restart the PC after completing the steps above.
4. After Windows restarts, ignore the message Load library fail, then
click OK to close the message.
5. Click Start
→ All Programs → Right click Command Prompt → Run
as administrator
Configuration Flow Chart (Embedded 64-bit OS)
This manual is related to the following products: