NEXCOM NISE 2000 User Manual
Page 80
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
67
NISE 2000, NISE 2010, NISE 2020 User Manual
Appendix A: Power Consumption
System Power Consumption
Test Condition
1. Power up the system and boot Windows XP.
2. Enter the standby mode (HDD power down).
3. Measure the power consumption and record it.
4. Run the Burn-in test program to apply 100% full loading.
5. Measure the power consumption using a clamp meter and record it.
NISE 2010
Watts
+19V
Total
Full-Loading Mode
1.28A
1.28A
24.36W
24.36W
Standby Mode
0.63A
0.63A
12.1W
12.1W