NEXCOM NISE 2000 User Manual

Page 70

Text mode
Original mode

NISE 2000, NISE 2010, NISE 2020 User Manual

Chapter 4: BIOS Setup

On-Chip Serial ATA

Disabled
Disables the onboard SATA.

Auto
The system will detect the existing SATA and IDE drives then auto-
matically set them to the available master/slave mode.

Enhanced Mode

This option allows you to use both IDE and SATA drives.

SATA Only
This option automatically sets the SATA drives to Primary Master
mode. Since the SATA drives are in Master mode, you cannot set
the IDE drive to Master mode.

This manual is related to the following products:

NISE 2010 NISE 2020